The cW2cH Adapter Cable from YPA Microphones is for connecting a wireless microphone with a cW-style 4-pin connector to a wireless bodypack transmitter that is equipped with a cH-style screw-down 4-pin connector.
cW-style 4-pin connector (male) to cH-style screw-down 4-pin connector (male)
Adapts cW-style wireless microphones to fit cH-style screw-down 4-pin connectors
With different systems in two workship spaces, this lets you give the person one mic and you can use two different series of transmitters.
Good solid connections and allows older AT cW lavaliers or headsets to work with the newer transmitters. to an Audio-Technica wireless bodypack transmitter including the ATW-T3201, ATW-T5201, and ATW-T6001S models..
Connector 1: cW-style 4-pin
Connector 2: cH-style screw-down 4-pin
Length: 5.9" (15cm)
Weight: Not specified by manufacturer
Package Weight: 0.1 lb
Box Dimensions (LxWxH):4.2 x 3.5 x 0.9"
confirm your wireless lavaliers or headsets with cW-style 4-pin connector's wiring diagram based on the technical data below:
3 wire method
- audio=pin 3
- bias=pin 4
- shield=pins 1 and 2
2 wire method
- audio=pin 3
- pin 4 to pin 3 with resistor
- shield=pins 1 and 2
cW-style 4-pin connector (male) to cH-style screw-down 4-pin connector (male)
Adapts cW-style wireless microphones to fit cH-style screw-down 4-pin connectors
With different systems in two workship spaces, this lets you give the person one mic and you can use two different series of transmitters.
Good solid connections and allows older AT cW lavaliers or headsets to work with the newer transmitters. to an Audio-Technica wireless bodypack transmitter including the ATW-T3201, ATW-T5201, and ATW-T6001S models..
Connector 1: cW-style 4-pin
Connector 2: cH-style screw-down 4-pin
Length: 5.9" (15cm)
Weight: Not specified by manufacturer
Package Weight: 0.1 lb
Box Dimensions (LxWxH):4.2 x 3.5 x 0.9"
confirm your wireless lavaliers or headsets with cW-style 4-pin connector's wiring diagram based on the technical data below:
3 wire method
- audio=pin 3
- bias=pin 4
- shield=pins 1 and 2
2 wire method
- audio=pin 3
- pin 4 to pin 3 with resistor
- shield=pins 1 and 2